Windows 10 20H2 installed on GLK-UC2X

Discussion in 'GLK-UC2X' started by Samuel, Nov 8, 2020.

  1. Samuel

    Samuel Member

    Today I updated to 20H2 without any errors, and DCH is also updated to 27.20.100.8935
     
  2. Support

    Support Administrator

    Thanks for sharing!
     
  3. Support

    Support Administrator

    We have been testing the 20H2 with the same graphics driver version for the past few weeks,

    with a fresh installation everything seems to be working just fine.
     
  4. Samuel

    Samuel Member

    NEWS... Found the best solution for fixing: how to mapping SMBv1 drive in Win10 2004/20H2

    1) Have to do it after 1st time finished mapping the drive in Win10, before any reboot
    2) RUN "regedit" and found at location HKey_Current_User\Network\XX (XX is your drive label)
    3) Add "ProviderFlags", dwords value is 0x00000001
    4) After that, your mapping drive is keep working after reboot

    Remarks : If not adding this "ProviderFlags", your mapping drive will be failed after reboot Win10
     
  5. Support

    Support Administrator

    Have you tried the Win 10X?
     
  6. Samuel

    Samuel Member

    Yes, I done, and finding this solution for a long time. (all SMBv1 NAS is not fully work in Win10 2004 or later)